Chinese Old English Email:prospercnc@prospercnc.com Guangdong Prosper CNC Machine Co.,Ltd

Guangdong Prosper CNC Machine Co.,Ltd

Product Categories
Contact Us

Office Add: YIFA industry zone, Pingtan, Huiyang, Huizhou,Guangdong, China.

Contact: ZHOU LU

MOB: +86 18607526899

Tel: +86-3103713, +86-3103400

Fax: +86-2522672

Website: www.prospercnc.net

Email: prospercnc@prospercnc.com

The Advantage Of Automatic CNC Metal Spinning Machine In Thermal Cutting Mode

The advantage of Automatic CNC Metal Spinning Machine in thermal cutting mode

  Automatic CNC Metal Spinning Machine is also one of the thermal cutting method, then the laser cutting and oxygen acetylene cutting and plasma cutting, and so on other thermal cutting method compared to the specific advantages of what? We can probably summarize the following aspects:

    1. Cutting quality: due to the small laser spot, high energy density, cutting speed, so Automatic CNC Metal Spinning Machine can get better cutting quality.

    ① Automatic CNC Metal Spinning Machine cutting incision narrow, parallel to both sides of the slit and perpendicular to the surface, cutting parts of the dimensional accuracy of up to ± 0.05mm.

    ② CNC metal cutting machine cutting surface smooth and beautiful, the surface roughness of only a few tens of microns, and even laser cutting can be used as a last process, without mechanical processing, parts can be used directly.

    ③ After the cutting of the material by Automatic CNC Metal Spinning Machine, the heat affected zone width is very small, the performance of the material near the slit is almost unaffected, and the workpiece deformation is small, the cutting precision is high, the geometrical shape of the slit is good, Shape showing a more regular rectangle.

    2. Automatic CNC Metal Spinning Machine cutting efficiency: due to the transmission characteristics of the laser, Automatic CNC Metal Spinning Machine is generally equipped with multiple CNC table, the entire cutting process can be all CNC. Operation, just change the NC program, you can apply different shapes of cutting parts, both two-dimensional cutting, but also to achieve three-dimensional cutting.

    3. Automatic CNC Metal Spinning Machine cutting speed: the power of 1200W laser cutting 2mm thick low carbon steel plate, cutting speed up to 15000px / min; cutting 5mm thick polypropylene resin board, cutting speed up to 30000px / min. Material in the laser cutting does not need to clamp fixed, can save fixture, but also save the upper and lower auxiliary time.

    4. Non-contact cutting: Automatic CNC Metal Spinning Machine cutting torch and the workpiece without contact, there is no tool wear. Processing different parts of the shape, do not need to replace the "tool", just change the laser output parameters. Laser cutting process low noise, small vibration, no pollution.

    5. Types of cutting materials: Compared with oxyacetylene cutting and plasma cutting, Automatic CNC Metal Spinning Machine cutting materials, including metal, non-metallic, metal and non-metallic matrix composite materials, leather, wood and fiber. However, for different materials, due to their own thermal physical properties and the absorption rate of different laser, showing a different laser cutting adaptability.

    From the market situation, Automatic CNC Metal Spinning Machine processing market steady growth in the macroeconomic and industrial demand in the context of weak, laser processing equipment with its high-end processing market in the business needs still maintain a steady growth in the size of the industry, Field, Automatic CNC Metal Spinning Machine than the traditional machine tool cutting and other hot processing, with multiple technical advantages, and high-end processing market requirements of high precision, low wear and high efficiency requirements are consistent.

The main features of Automatic CNC Metal Spinning Machine

(1) CNC metal automatic cutting electromechanical - high conversion efficiency, conversion efficiency of more than 30%, low-power CNC automatic cutting machine without a chiller, the use of air-cooled, can save a lot of power consumption, save operating costs , To achieve the highest production efficiency;

(2) the laser operation requires only electrical energy, no need to generate additional laser gas, with the lowest operating and maintenance costs;

(3) Automatic CNC Metal Spinning Machine using semiconductor modular and redundant design, resonant cavity without optical lens, no start-up time, with no adjustment, maintenance-free, high stability advantages, reducing the cost of accessories and maintenance time , Which is unmatched by traditional lasers;

(4) Automatic CNC Metal Spinning Machine output wavelength of 1.064 microns, is the CO2 wavelength of 1/10, the output beam of good quality, high power density, is very conducive to the absorption of metal materials, with excellent cutting, welding capacity, thus So that the lowest processing costs;


Copyright ©Guangdong Prosper CNC Machine Co.,Ltd. All rights reserved.
QR Code