Chinese Old English Email:prospercnc@prospercnc.com Guangdong Prosper CNC Machine Co.,Ltd

Guangdong Prosper CNC Machine Co.,Ltd

Product Categories
Contact Us

Office Add: YIFA industry zone, Pingtan, Huiyang, Huizhou,Guangdong, China.

Contact: ZHOU LU

MOB: +86 18607526899

Tel: +86-3103713, +86-3103400

Fax: +86-2522672

Website: www.prospercnc.net

Email: prospercnc@prospercnc.com

Automatic CNC Metal Spinning Machine Cutting Straight Arc Method

Automatic CNC Metal Spinning Machine cutting straight arc method
Automatic CNC Metal Spinning Machine cutting steel cutting pieces of a variety of shapes, but in general can not be separated from the straight line and circular arc cutting. In order to ensure the quality of Automatic CNC Metal Spinning Machine cutting, according to the shape of the cutting pieces in order to cut, grasp the law of cutting. Here's a small series for everyone to introduce Automatic CNC Metal Spinning Machine cutting straight arc method:
When Automatic CNC Metal Spinning Machine a straight checkered or long-cut piece, cut it to the cross point according to its width or length, and then stop the cutting, stopping before and after the cross point. When cutting a straight line with a hard corner point, the long straight line stops at the corner point and then cut again. Short straight lines and hard corner point angle of 120 ° or more, you can cut to the corner point a little pause, and then continue cutting.
Every time cutting to a hard inflection point, the cutting nozzle must be perpendicular to the cutting plane, so as to avoid the slope of the section, especially for cutting thick bulges. If the straight line and arc connected, it is best to cut the two straight lines and then cut the semi-circular arc.
If the size of both ends of the semi-circular arc Automatic CNC Metal Spinning Machine pieces, from one end of the small arc began cutting, straight lines have been cut off. Do not cut to a large arc at the stop. Because that would make the other side of the arc near the cutting line is not neat and the section is not smooth. Then cut the large arc and small arc, so as to avoid circular arc line skew. In case of larger semicircular arcs, it is best to cut semicircular arcs with a circular arc cut.
Through the above description of Automatic CNC Metal Spinning Machine cutting straight arc method, hoping to expand your horizons, you are welcome to buy my company's products. Look forward to the majority of Automatic CNC Metal Spinning Machine has the needs of customers came to negotiate, our services for your development to provide the necessary protection.
It goes without saying that Automatic CNC Metal Spinning Machine CNC system is a core component of the system directly affects the performance of Automatic CNC Metal Spinning Machine is good or bad performance, buy Automatic CNC Metal Spinning Machine to ask clear system stability and anti-interference Ability and its function and characteristic. My company production and sales of CNC automatic cutting machine with power protection memory function. Below for everyone to introduce and memory protection for power off function;
In some cases, if the Automatic CNC Metal Spinning Machine is in operation and the power is cut off unexpectedly, then the CNC automatic cutting machine will inevitably stop running, the cutting process will be interrupted and the cutting path may stop at any point of the graph; The situation, even if the power again, many CNC systems can not continue to complete the pre-power down the program, everything will start cutting.
Even if the Automatic CNC Metal Spinning Machine is powered off during operation, the unique memory function of the system remembers the cutting point at power-off and saves the graph automatically. After the power is turned on again, the cutting can be completed only by connecting the cut before the power cut , This is power-off memory protection.
Automatic CNC Metal Spinning Machine that can be flexibly forward and reverse operation. As in the processing, according to processing requirements of the track, at any time can be achieved forward or reverse movement. At the same time require the direction of change, there should be no backlash and loss of movement. From the energy point of view, we should achieve the reversible conversion of energy, that is, in the process of operation, the motor absorbs energy from the grid into mechanical energy: braking should be the mechanical inertial energy into electrical energy back to the grid in order to achieve rapid braking .

Copyright ©Guangdong Prosper CNC Machine Co.,Ltd. All rights reserved.
QR Code